中圖分類號：TN402 文獻標志碼：A DOI: 10.16157/j.issn.0258-7998.222955 中文引用格式： 李想. 幅度校準功能的低附加相移數(shù)控衰減器[J]. 電子技術(shù)應(yīng)用，2023，49(2)：26-31. 英文引用格式： Li Xiang. Low phase variation digital controlled attenuator with amplitude calibration function[J]. Application of Electronic Technique，2023，49(2)：26-31.
Low phase variation digital controlled attenuator with amplitude calibration function
Li Xiang
Southwest China Institute of Electronic Technology，Chengdu 610036，China
Abstract： This paper presents a high accuracy and low phase variation 5-bit digital controlled attenuator (DCA) for Ka-band phased-array system applications. The DCA adopts three attenuation topologies of T-type, simplified T-type and Π-type topologies with embedded switches to design the basic attenuation cells, and realizes the attenuation dynamic range of 15.5 dB and the minimum attenuation step of 0.5 dB. Amplitude calibration technology is used in signal path, which can effectively reduce the increase of attenuation amplitude error caused by process fluctuation and enhance the robustness of circuit design. At the same time, capacitance compensation technology is used in T-type and Π-type attenuation topologies to improve their high-frequency attenuation performance and achieve low phase variation. Based on 65 nm CMOS process, the proposed DCA is optimization simulated, taped out, measured and verified. The core area of the chip is 500 µm×150 µm. The measurement results show that within frequency range of 25~35 GHz, the insertion loss of reference state is 6.54~8.6 dB, the input/output return loss corresponding to 32 attenuation states is better than -15 dB, and the amplitude error RMS and phase error RMS are 0.12～0.26 dB and 1.02～2.07o, respectively.
Key words : digital controlled attenuator；amplitude calibration；low amplitude error；low phase variation
